Message 280
From:Ê  "Steve Ridley" <spr@s...> 
Date:Ê SunÊAugÊ3,Ê2003Ê 12:26 am
Subject:Ê Re: [resergence] (unknown)> 

> One last thing....there's a mistake in Ken's "Smooth/Stepped" 
> schematic. The 470K resistor that goes to pin 2 of the Coupler's 
> LM741 should in fact connect to the LEFT hand side of that 
> driving 10K resistor not the Right hand side as it's shown 
> (hope that makes sense).

I reverse-engineered that schematic, and I'm 99% certain that's how
it is.Ê Whether Serge or Rex meant it to be that way is another matter. 
Pin 2 isn't a virtual earth, so it should still workÊ- I assume it must
work, otherwise there would be some unhappy SSG users. ÊThere was also 
a resistor soldered on the back of the same board, where
they'd either missed one out or decided to add one later, so they're not
infallible.Ê 

The board was dated '99.ÊÊÊ

Steve